【Products description of Pellet Machine Wood Pellets Mill】

Compared with ordinary ring mold pellet machine:

Mold upward, unique structure, vertical feeding, conducive to heat dissipation: mold upward, vertical feeding to the pelletization room, so that the materials can be directly in place without other power assisted devices. However, the feeding port of the ordinary ring mold pellet machine is installed at the side, and it is difficult for the material with light specific gravity to enter the pelletization chamber, which requires a special device for forced propulsion and is uneven. The most important reason is that the pelletization chamber cannot dissipate heat and temperature, which restricts the service life of the transmission system (gears and bearings). The flat mold pellet machine has two structures. Although it can feed vertically, it has many disadvantages that are difficult to remove.

【Parameters of Pellet Machine Wood Pellets Mill】

【Working principle of Pellet Machine Wood Pellets Mill】

Pellet Machine Wood Pellets Mill is driven to reverse, and the materials enter the restricted area in the ring mold. There are two pressure rollers (three pressure rollers are used for 850 type and above). Because the pressure rollers rotate to transfer the materials between the mold and the rollers, the two rotating parts severely knead the materials, and they are squeezed into the die hole. The formed pellets are extruded outside, and the pellets are extruded out of the die hole in a cylindrical shape, and finally cut off into pelletized fuel by a fixed cutter. In the production process of the pellet machine, the orientation of the powder in the restricted area is different, and the pressing force of the pressure roller is also different.

【Our Company】