PRODUCT
▪ Crushing Process
▪ Drying Process
▪ Mixing Process
▪ Pelleting Process
▪ Cooling Process
▪ Packaging Process
▪ Related Machines
▪ Complete Pellet Line
SUPPORT
Reasons For the Large Amount Of Dust at the Pellet Machine Powder Drop Port
TIME:2025-02-25 14:40:20 WRITER：JINAN GLOBAL MACHINE MANUFACTURER
In the production of biomass pellets, what is the reason for the large amount of dust at the powder falling port?
This situation must be caused by serious wear and damage of the wear ring seal.
Exclusion method:
If it is a new machine and has not been used for a long time, you need to check whether there are many impurities in the material.
Such as iron, stone, large pieces of wood, etc.
If there are too many impurities, it will cause the impurities to get stuck in the wear-resistant ring sealing ring, resulting in a short service life of the wear-resistant ring and sealing ring.
In this case, just replace the wear ring and sealing ring in time.
If the material is normal and the equipment has been used for about 300 hours, it is considered normal wear and tear, and the wear ring sealing ring can be replaced.
If you want to know more about our pellet mill, welcome to subscribe to our YouTube channel.
