PRODUCT
▪ Crushing Process
▪ Drying Process
▪ Mixing Process
▪ Pelleting Process
▪ Cooling Process
▪ Packaging Process
▪ Related Machines
▪ Complete Pellet Line
NEWS
Pellets Wood Mill with CE Complete Biomass Wood Pellet Production Line
TIME:2022-04-08 13:20:04 WRITER：JINAN GLOBAL MACHINE MANUFACTURER
Pellets Wood Mill with CE Complete Biomass Wood Pellet Production Line
Brief Description:
This Pellets Wood Mill with CE Complete Biomass Wood Pellet Production Line is a simple production line of complete granulation equipment, with an output of 300-400 kg per hour . This set of production mainly includes the crushing section, the granulating section and the intermediate conveying section, as well as the power control system section. The star-delta step-down start is used, which greatly saves power loss.
All equipment in the production line can be replaced and matched, which has achieved the purpose of adapting to customer needs, and equipped with different models to meet different output requirements.
The production line requires that the size of the raw material is not larger than 3-5cm, the thickness is not too thick, and the moisture requirement is between 15-20%. After the production of wood pellets, it is required to be dried to room temperature and then packaged into bags. Other equipment such as crushers, dryers, pellet coolers, etc. can also be selected to achieve more complete configuration requirements.
If you have any questions or other requirements, please call +86-15589939399 to provide you with professional answers.
The Parameters of Sawdust production line
Advantages:
1. The Pellets Wood Mill with CE Complete Biomass Wood Pellet Production Line has less investment, less land occupation and low maintenance cost;
2. The line includes grinder, conveyors and granulators, which are widely used;
3. The granulator and grinder included in this production line are fixed products for many years, with low failure rate and high cost performance;
Branches, stems, bark and other wood scraps;
Rice husks, sunflower seed husks, peanut husks and other fruit husks;
Corn stalks, sawdust rice husks, cotton stalks, weeds and other crop stalks;
Rural breeding professional households and farm feed pellets;
It is also suitable for low-temperature granulation of biological bacterial fertilizer, organic fertilizer, compound fertilizer, etc.;
The production line is suitable for feed mills, wood processing plants, fuel plants, fertilizer plants, chemical plants, etc.
Our Clients
Our Certifications
Delivery Photo
This is the one ton complete line includes the sawdust pellet mill, wood chipper, hammer mill, rotary dryer , pellet cooler and the belt conveyors. when delivery to home client, it need one 17 meters truck. If export aboard, it need one 40GP+one 20GP containers.
Rotary Dryer Delivery
For delivery rotary dryer, we always need the open top containers for easy loading and unloading.
Rorary dryer is also very important in the complete pellet machine line.
So we hope to know your exact input wood sawdust moisture.
Crude Crushing Process, Drying Process, Fine Milling Process, Pelleting Process, Cooling Process, Packaging Process etc with the required silos and the conveyors.
First step:
Crude Crushing Process. There are machines can be choose in this process according to different kinds of raw material. If your raw material is wood logs, you can choose the drum chipper or disc chipper’ if your raw material is branches, you can choose the branches crusher; if your raw material is waste pallet, then you can choose the chain pallet crusher; if your raw material is the straw or stalk bales, then please choose the bale crusher or grass cutter, and so on. So the raw material kinds and size is very important for us to confirm the machines kinds and models.
Second step:
Drying Process. If the wood or the straw is too wet, then this rotary dryer is necessary, however for small capacity, we strongly advise client not to choose the dryer process, because this dryer should work with stove or heat ex-changer, the cost is also not small. The type of the dryer can be choose the air pipes or the rotary dryer, chain dryer or any other types according to different raw material.
Third stepis Fine Milling Process. This process makes the crude dry chips or the straw pieces into dust shape, preparing the feeder material for pellet press. We usually choose the hammer mill type as the key machines in this process.
Forth step is Pelleting Process. In this process, the pellet machine is the key machines, the choices is too many according to raw material kinds and output demand. For the raw material of wood kinds or straw kinds or any kinds of crude fiber raw material, we advise to choose the newest model of pellet machine. Because the newest model of pellet is the 9th generation in the market. The capacity is higher and structure is stronger than old generations. We will introduce in in the pellet machine characters.
Fifth step is Cooling Process. The client can choose the simple mesh cooler or the standard cooler box in the line. It is up to the output and cost etc. However this process is necessary and important.
Sixth step is the packing process, this process is up to client, and can choose the small bag packing or the big bag tons packing.
The other related machines are the conveyors and the silos. For making the complete line working fluently, these silos and the conveyors are also necessary. They are designed according to the workshop height and the length. We usually design the line based on saving room first, but you have some other demand, we can also change them accordingly.
So for making the complete pellet line offer, many things are so important, so before asking the complete pellet line, please note us your raw material kinds and sizes and moisture first, and then we can design the line for you.
As the complete pellet line, also have many kinds of different kinds, such as the simple line, the standard line and the semi-auto full line or full auto line. It is up to the client budget. However, it is not fixed, because everything in the line can be changed according to the final budget. So how will you compare the machines quality only from the prices?
Based on our experience since the year of 2008. we have one rules for you to choose the line. The rule: When the same output line, please consider the line configuration; if same configuration, please consider the parts matching; if same parts matching, please consider the machine weight; if same machine weight, please consider the after-sell attitude, not only words but in fact.
Brief Description:
This Pellets Wood Mill with CE Complete Biomass Wood Pellet Production Line is a simple production line of complete granulation equipment, with an output of 300-400 kg per hour . This set of production mainly includes the crushing section, the granulating section and the intermediate conveying section, as well as the power control system section. The star-delta step-down start is used, which greatly saves power loss.
All equipment in the production line can be replaced and matched, which has achieved the purpose of adapting to customer needs, and equipped with different models to meet different output requirements.
The production line requires that the size of the raw material is not larger than 3-5cm, the thickness is not too thick, and the moisture requirement is between 15-20%. After the production of wood pellets, it is required to be dried to room temperature and then packaged into bags. Other equipment such as crushers, dryers, pellet coolers, etc. can also be selected to achieve more complete configuration requirements.
If you have any questions or other requirements, please call +86-15589939399 to provide you with professional answers.
The Parameters of Sawdust production line
| - | Name | DESCRIPTION | Advantages | |||
| 200-300kg/h | 300-400kg/h | 400-600kg/h | 500-800kg/h | |||
| 1 | Multifunctional Hammer Mill |
Model: SG50 Power: 7.5kW Rotor working diameter: 500mm; Rotor rotary speed: 3100rpm； Hammers QTY: 4×4=16pcs Size: 1400×750×900mm Weight: 200kg。 |
Model: SG50, Power：11kw； Rotor working diameter: 500mm； Rotor rotary speed: 3100rpm； Hammers QTY: 4×4=16pcs Size: 1400×750×900mm Weight: 200kg。 |
Model: SG65*27 Power：15kW Rotor working diameter: 600mm； Rotor rotary speed: 2950rpm； Hammers QTY: 4×6=24pcs； Size: 1550×780×1130mm； Weight: 400kg。 |
Model: SG65*27 Power：22kW Rotor working diameter: 600mm； Rotor rotary speed: 2950rpm； Hammers QTY: 4×6=24pcs Size: 1550×780×1130mm； Weight: 420kg。 |
Pass the dynamic and static balance test; The hammer is welded with wear-resistant material to ensure the service life; |
| 2 | Fan | Centrifugal fan Power:4kw |
Centrifugal fan Power: 4kw； |
Centrifugal fan Power: 5.5kw； |
Centrifugal fan Power: 5.5kw； |
High quality, Make sure lifetime |
| 3 | Cyclone | diameter:600mm； | diameter:600mm； | diameter:800mm； | diameter:800mm； | Material and dust separation |
| 4 | Air lock | Air lock: 5L， Power:1.5kW |
Air lock: 5L， Power:1.5kW |
Air lock: 5L， Power:1.5kW； |
Air lock: 5L， Power:1.5kW； |
Effectively avoid dust spillage |
| 5 | Bag filter | Bag filter：9 holes | Bag filter：9 holes | Bag filter：9 holes | Bag filter：12 holes | |
| 6 | Buffer | Volume:0.3-0.5m³ | Volume:0.3-0.5m³ | Volume:0.3-0.5m³ | Volume:0.3-0.5m³ | |
| 7 | screw conveyor |
Screw diameter: 165mm； Power：0.75kW |
Screw diameter: 165mm； Powe：0.75kW |
Screw diameter: 219mm； Power：1.5kW |
Screw diameter: 219mm； Power：1.5kW |
Closed type, With frequency converter, to adjust feeding speed |
| 8 | Flat die Pellet Mill |
Model：SKJ300R Power:22KW Output: 200-300kg/h Size： 1280*550*1200mm; Weight：800kg |
Model：SKJ350R Power:30KW Output: 300-400kg/h Size： 1300*630*1300mm; Weight：900kg |
Model：SKJ400R Power:37KW Output:400-600kg/h Size： 1400*650*1380mm; Weight：1000kg |
Model：SKJ450R Power:45KW Output:500-800kg/h Size： 1620*690*1600mm; Weight：1500kg |
Flat die structure, vertical feeding; Screw center pressure regulating mechanism to make sure two rollers press evenly; Flat die and roller is made of high-quality alloy steel; |
| 9 | Electric control box | Adopts star-delta step-down start; Electrical parts use well-known brands |
Adopts star-delta step-down start; Electrical parts use well-known brands |
Adopts star-delta step-down start; Electrical parts use well-known brands |
Adopts star-delta step-down start; Electrical parts use well-known brands |
|
| Total Power | 35.75kW | 47.25kW | 60.50kW | 75.50kW | ||
| Capacity | 200-300kg/h | 300-400kg/h | 400-600kg/h | 500-800kg/h | ||
Advantages:
1. The Pellets Wood Mill with CE Complete Biomass Wood Pellet Production Line has less investment, less land occupation and low maintenance cost;
2. The line includes grinder, conveyors and granulators, which are widely used;
3. The granulator and grinder included in this production line are fixed products for many years, with low failure rate and high cost performance;
Main Features
1) Simple structure in linear type ,easy in installation and maintation.
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts.
3) High pressure double crank to control the die opening and closing.
4) Running in a high automatization and intellectualization,no pollution
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine .
Crude Crushing Process, Drying Process, Fine Milling Process, Pelleting Process, Cooling Process, Packaging Process etc with the required silos and the conveyors.
First step:
Crude Crushing Process. There are machines can be choose in this process according to different kinds of raw material. If your raw material is wood logs, you can choose the drum chipper or disc chipper’ if your raw material is branches, you can choose the branches crusher; if your raw material is waste pallet, then you can choose the chain pallet crusher; if your raw material is the straw or stalk bales, then please choose the bale crusher or grass cutter, and so on. So the raw material kinds and size is very important for us to confirm the machines kinds and models.
Second step:
Drying Process. If the wood or the straw is too wet, then this rotary dryer is necessary, however for small capacity, we strongly advise client not to choose the dryer process, because this dryer should work with stove or heat ex-changer, the cost is also not small. The type of the dryer can be choose the air pipes or the rotary dryer, chain dryer or any other types according to different raw material.
Third stepis Fine Milling Process. This process makes the crude dry chips or the straw pieces into dust shape, preparing the feeder material for pellet press. We usually choose the hammer mill type as the key machines in this process.
Forth step is Pelleting Process. In this process, the pellet machine is the key machines, the choices is too many according to raw material kinds and output demand. For the raw material of wood kinds or straw kinds or any kinds of crude fiber raw material, we advise to choose the newest model of pellet machine. Because the newest model of pellet is the 9th generation in the market. The capacity is higher and structure is stronger than old generations. We will introduce in in the pellet machine characters.
Fifth step is Cooling Process. The client can choose the simple mesh cooler or the standard cooler box in the line. It is up to the output and cost etc. However this process is necessary and important.
Sixth step is the packing process, this process is up to client, and can choose the small bag packing or the big bag tons packing.
The other related machines are the conveyors and the silos. For making the complete line working fluently, these silos and the conveyors are also necessary. They are designed according to the workshop height and the length. We usually design the line based on saving room first, but you have some other demand, we can also change them accordingly.
So for making the complete pellet line offer, many things are so important, so before asking the complete pellet line, please note us your raw material kinds and sizes and moisture first, and then we can design the line for you.
As the complete pellet line, also have many kinds of different kinds, such as the simple line, the standard line and the semi-auto full line or full auto line. It is up to the client budget. However, it is not fixed, because everything in the line can be changed according to the final budget. So how will you compare the machines quality only from the prices?
Based on our experience since the year of 2008. we have one rules for you to choose the line. The rule: When the same output line, please consider the line configuration; if same configuration, please consider the parts matching; if same parts matching, please consider the machine weight; if same machine weight, please consider the after-sell attitude, not only words but in fact.
Scope of application:Complete Set Pellet Complete Line Brief Introduction:
The complete line of wood pellet line is always made according to the client demand and based on the client raw material details. However it mainly includes several process following:Crude Crushing Process, Drying Process, Fine Milling Process, Pelleting Process, Cooling Process, Packaging Process etc with the required silos and the conveyors.
First step:
Crude Crushing Process. There are machines can be choose in this process according to different kinds of raw material. If your raw material is wood logs, you can choose the drum chipper or disc chipper’ if your raw material is branches, you can choose the branches crusher; if your raw material is waste pallet, then you can choose the chain pallet crusher; if your raw material is the straw or stalk bales, then please choose the bale crusher or grass cutter, and so on. So the raw material kinds and size is very important for us to confirm the machines kinds and models.
Second step:
Drying Process. If the wood or the straw is too wet, then this rotary dryer is necessary, however for small capacity, we strongly advise client not to choose the dryer process, because this dryer should work with stove or heat ex-changer, the cost is also not small. The type of the dryer can be choose the air pipes or the rotary dryer, chain dryer or any other types according to different raw material.
Third stepis Fine Milling Process. This process makes the crude dry chips or the straw pieces into dust shape, preparing the feeder material for pellet press. We usually choose the hammer mill type as the key machines in this process.
Forth step is Pelleting Process. In this process, the pellet machine is the key machines, the choices is too many according to raw material kinds and output demand. For the raw material of wood kinds or straw kinds or any kinds of crude fiber raw material, we advise to choose the newest model of pellet machine. Because the newest model of pellet is the 9th generation in the market. The capacity is higher and structure is stronger than old generations. We will introduce in in the pellet machine characters.
Fifth step is Cooling Process. The client can choose the simple mesh cooler or the standard cooler box in the line. It is up to the output and cost etc. However this process is necessary and important.
Sixth step is the packing process, this process is up to client, and can choose the small bag packing or the big bag tons packing.
The other related machines are the conveyors and the silos. For making the complete line working fluently, these silos and the conveyors are also necessary. They are designed according to the workshop height and the length. We usually design the line based on saving room first, but you have some other demand, we can also change them accordingly.
So for making the complete pellet line offer, many things are so important, so before asking the complete pellet line, please note us your raw material kinds and sizes and moisture first, and then we can design the line for you.
As the complete pellet line, also have many kinds of different kinds, such as the simple line, the standard line and the semi-auto full line or full auto line. It is up to the client budget. However, it is not fixed, because everything in the line can be changed according to the final budget. So how will you compare the machines quality only from the prices?
Based on our experience since the year of 2008. we have one rules for you to choose the line. The rule: When the same output line, please consider the line configuration; if same configuration, please consider the parts matching; if same parts matching, please consider the machine weight; if same machine weight, please consider the after-sell attitude, not only words but in fact.
Rice husks, sunflower seed husks, peanut husks and other fruit husks;
Corn stalks, sawdust rice husks, cotton stalks, weeds and other crop stalks;
Rural breeding professional households and farm feed pellets;
It is also suitable for low-temperature granulation of biological bacterial fertilizer, organic fertilizer, compound fertilizer, etc.;
The production line is suitable for feed mills, wood processing plants, fuel plants, fertilizer plants, chemical plants, etc.
Guarantee Period is TWO years.
Except the wear parts, the whole machine guarantee period will be 2 years!FREE installation locally once total price above usd200,000.
When your order amount of only machines bigger than USD 200,000.00, we will send technical man to lead your installation FREELY.Factory Direct Sell, Competitive Price.
We are factory Direct Sell, and make sure the end clients the biggest profit..Our Clients
One Ton CE pellet mill production line machines pellet
Flat Die production line machines pellet
Small Feed Pellet Mill
Old Friends of ring die production line machines pellet
Our Certifications
Delivery Photo
One Ton production line machines pellet
The 20GP Container can hold the simple one ton pellet mill line includes the sawdust pellet mill, pellet cooler, two belt conveyors and one packing machine.
One Ton CE pellet mill production line
This is the one ton complete line includes the sawdust pellet mill, wood chipper, hammer mill, rotary dryer , pellet cooler and the belt conveyors. when delivery to home client, it need one 17 meters truck. If export aboard, it need one 40GP+one 20GP containers.Rotary Dryer Delivery
For delivery rotary dryer, we always need the open top containers for easy loading and unloading.
Rorary dryer is also very important in the complete pellet machine line.
So we hope to know your exact input wood sawdust moisture.
Complete Set Pellet Complete Line Brief Introduction:
The complete line of wood pellet line is always made according to the client demand and based on the client raw material details. However it mainly includes several process following:Crude Crushing Process, Drying Process, Fine Milling Process, Pelleting Process, Cooling Process, Packaging Process etc with the required silos and the conveyors.
First step:
Crude Crushing Process. There are machines can be choose in this process according to different kinds of raw material. If your raw material is wood logs, you can choose the drum chipper or disc chipper’ if your raw material is branches, you can choose the branches crusher; if your raw material is waste pallet, then you can choose the chain pallet crusher; if your raw material is the straw or stalk bales, then please choose the bale crusher or grass cutter, and so on. So the raw material kinds and size is very important for us to confirm the machines kinds and models.
Second step:
Drying Process. If the wood or the straw is too wet, then this rotary dryer is necessary, however for small capacity, we strongly advise client not to choose the dryer process, because this dryer should work with stove or heat ex-changer, the cost is also not small. The type of the dryer can be choose the air pipes or the rotary dryer, chain dryer or any other types according to different raw material.
Third stepis Fine Milling Process. This process makes the crude dry chips or the straw pieces into dust shape, preparing the feeder material for pellet press. We usually choose the hammer mill type as the key machines in this process.
Forth step is Pelleting Process. In this process, the pellet machine is the key machines, the choices is too many according to raw material kinds and output demand. For the raw material of wood kinds or straw kinds or any kinds of crude fiber raw material, we advise to choose the newest model of pellet machine. Because the newest model of pellet is the 9th generation in the market. The capacity is higher and structure is stronger than old generations. We will introduce in in the pellet machine characters.
Fifth step is Cooling Process. The client can choose the simple mesh cooler or the standard cooler box in the line. It is up to the output and cost etc. However this process is necessary and important.
Sixth step is the packing process, this process is up to client, and can choose the small bag packing or the big bag tons packing.
The other related machines are the conveyors and the silos. For making the complete line working fluently, these silos and the conveyors are also necessary. They are designed according to the workshop height and the length. We usually design the line based on saving room first, but you have some other demand, we can also change them accordingly.
So for making the complete pellet line offer, many things are so important, so before asking the complete pellet line, please note us your raw material kinds and sizes and moisture first, and then we can design the line for you.
As the complete pellet line, also have many kinds of different kinds, such as the simple line, the standard line and the semi-auto full line or full auto line. It is up to the client budget. However, it is not fixed, because everything in the line can be changed according to the final budget. So how will you compare the machines quality only from the prices?
Based on our experience since the year of 2008. we have one rules for you to choose the line. The rule: When the same output line, please consider the line configuration; if same configuration, please consider the parts matching; if same parts matching, please consider the machine weight; if same machine weight, please consider the after-sell attitude, not only words but in fact.
