Today we will continue to talk about 10 reasons and solutions for blockage in pellet machines, and try to help everyone.
 
Six, bearing damage.

Replace bearings with good quality and perform regular maintenance accordingly.

Seven, the amount of unloading water is inappropriate.
Choose appropriate raw materials or use a bedside machine to ensure that the unloading water volume meets the requirements.

Eight, the compression ratio of the ring die is too large.

If the mold is clogged as soon as the feed is fed, or there is carbonization and blackening, it means that the ring mold is not suitable for producing actual feed, and it is necessary to replace the ring mold with a suitable compression ratio.

Nine, the ring molding roller has severe fatigue.

The pressed roller is severely fatigued, has no teeth on the surface, and does not have enough coefficient force to send the material into the ring die hole.

The bell mouth of the ring die is severely fatigued and may clog the machine, and the ring die pressure roller needs to be replaced.

Ten, scraper problem.

When pressing, the angle and thickness of the large scraper are wrong. The deflection scraper can be replaced or reassembled.




 If you want to know more about our pellet mill, welcome to subscribe to our YouTube​ channel.